KGW
1- 10
5 -
Non-active
, only possible in combination with dual-range scales.
6 -
Press button to activate Print Total- Function
Through this scales display value (plus additional data) will transmitted be via UHF
radio to receiver units (see accessories), e.g. a total print out (total of all single weight
values will be activated on the integrated printer of TELEDATA receiver unit (additon
of all single weight registrations transmitted by ADD- Function).
7 -
Press button to activate Test Routine (Test- Button)
This key has same function as on scales’ keypad.
8 -
Press button for scales’ (remote) power- off
Press this button to switch off the scale by remote control. A re-power-on is possible
by pressing any button of IR- transmitter or by pressing function key
on scales’
keypad. This function could be set deactivated by factory or in scale setup.
9 -
Non-active
10 -
Non-active
11 -
Enter- Button
This press button transfers a code (max. 5 digits) which is entered by numeric keys
together with actual weight value via radio / RS232 (see accessories) to receiver
devices.
12 -
Shift- Button
Press this button to activate numeric keys. Now you can input any numbers (max. 5
digit code) between 0…9 (blue numbers).
13-
Symbol for active numeric keys
If this LED is illuminated then you can select the (blue) numbers of IR- transmitter
numeric block (see also
Shift- Button
).
14-
Transmission- Symbol
Transmitting remote control is displayed by flashing LED.
Note:
If functions:
,
Add
and
Total
are activated by IR-transmitter, their characters are also
displayed on scale. Activating of function keys is now locked during the next approx. 5 seconds in
order to prevent transmitting several commands by mistake.
