KGW
1- 5
2. Display and Keypad
3.
Description of Function keys
Function Key for Scales Power-On
•
Switches on the scale.
•
Activates the automatic display segment check.
•
After testing without error display is automatically set to “0“.
Please always switch on scale minimum 5 minutes (warm-up time) before
start of weighing. If preload exceeds 20% of crane scales nominal capacity
(initial zero-setting range) then only
+/-
sign is displayed. Normal operating
status /weighing mode will be reached again by reducing preload under the
20%-limit and power off-/on-switching.
Function Key for Scales Power-Off
•
Switches off the scale.
Power off-/on-switching will reset all crane scale errors (reset function).
Function Key for Test- Routine
Activates during approx. 5 seconds the automatic display segment check
and further particulars are displayed.
For approx. 5 seconds display is flashing:
8 8 8 8 8
(Segment Check)
LAH 11.03
(Software version)
- - - 0 1
(Scale No.)
C
0 1
(Frequency Channel No.)
H
0 1
(IR- Transmitter Channel No.)
Keypad
