Seite/Page 4 von/of 26
UV Flame Detector
Type: FL (Ex) d 07-.-..-..
10/21/2016
3
Date
Version
Betriebsanleitung Nr./
Operating Instructions No.
4.09262.9-1
2. General safety instructions
2.1. Safety instructions for staff
The operating instructions contains basic safety instructions that must be observed for
assembly, commissioning, testing, maintenance, repairs and for trouble.
Failure to observe them may result in injuries or damage.
WARNING
Unauthorized work on UV flame detector!
May result in injuries or damage.
Work such as:
Assembly, installation, commissioning, testing, maintenance, repairs and
troubleshooting must only be performed by trained personnel.
2.2. Prior to assembly, installation and commissioning, work
Read operating instructions completely.
If anything is unclear, please contact
Egon Harig GmbH
.
The national erection and installation regulations apply.
such as IEC/EN 60079-14
2.3. When operating the UV flame detector
WARNING
Never operate the UV flame detector without a protective grille or if the grille is
damaged!
May result in injuries or damage.
The UV flame detector must not be put into operation or operated without a
protective grille or if the grille is damaged, risk to the explosion protection.
Observe the safety instructions in the operating manual.
Observe all national safety and accident prevention regulations.
Only operate the UV flame detector in accordance with the output data as
shown
on the name plate and in the corresponding datasheets.
Drawing no.: 4.09262.10-1 or 4.09262.13-1 or 4.09262.14-1 or 4.09262.15-1
Any work not described in this operating manual require
our consent in advance.
