UV Flame Detector
Type: FL (Ex) d 07
10/21/2016
3
Date
Version
Once the work has been completed,
the enclosure cover.
In this regard, also refer to the section
Conduct an insulation test according to
(1)
(2)
(3)
(3)
Example: With a PROFIBUS hybrid cable 1 x 2 x 0.64 diam. + 4 x 1.5 mm²
Incorrectly performed installation!
May result in injuries or damage.
It must be ensured with a suitable selection of the connection cables
used and with the type of installation that
It must be ensu
to the connection terminals.
The conductors must not be damaged during stripping.
Seite/
UV Flame Detector
Type: FL (Ex) d 07-.-..-..
Betriebsanleitung Nr./
Operating Instructions No.
Once the work has been completed, carefully close the UV flame detector with
the enclosure cover.
In this regard, also refer to the section
"Closing / opening enclosure cover"
Conduct an insulation test according to IEC/EN 60439
(1)
(2)
(3)
(3)
Example: With a PROFIBUS hybrid cable 1 x 2 x 0.64 diam. + 4 x 1.5 mm²
WARNING
Incorrectly performed installation!
May result in injuries or damage.
It must be ensured with a suitable selection of the connection cables
used and with the type of installation that
EX protection
It must be ensure that after stripping the conductor insulation reaches up
to the connection terminals.
The conductors must not be damaged during stripping.
/Page 11 von/of 26
Betriebsanleitung Nr./
Operating Instructions No.
4.09262.9-1
carefully close the UV flame detector with
"Closing / opening enclosure cover"
EN 60439-1.
(2)
(3)
Example: With a PROFIBUS hybrid cable 1 x 2 x 0.64 diam. + 4 x 1.5 mm²
It must be ensured with a suitable selection of the connection cables
EX protection
is guaranteed.
re that after stripping the conductor insulation reaches up
The conductors must not be damaged during stripping.
