EGO ST1530E, Operator'S Manual

Page: 7 / 224

56 VOLT LITHIUM-ION CORDLESS LINE TRIMMER — ST1530E
7
EN
SPECIFICATIONS
Trimmer head 3-teeth blade
Voltage
56 V 56 V
Recommended Operat-
ing Temperature:
0°C-40°C
Recommended Storage
Temperature:
-20°C-70°C
Optimum Charging
Temperature
5°C-40°C
No-load speed
5000/6000
min
-1
5000/6000
min
-1
Cutting Line Type 2.4mm
/
Cutting blade / ABB1203
Cutting Width 38 cm 30cm
Weight (Without battery
pack)
4.21Kg 4.45 kg
Measured sound power
level L
WA
94.6 dB(A)
K=1.8 dB(A) 96.5 dB(A)
K=1.88 dB(A)
Sound pressure level at
operator’s ear L
PA
81.7 dB(A)
K=2.5 dB(A) 76.5 dB(A)
K=3 dB(A)
Guaranteed sound
power level L
WA
(according to
2000/14/EC)
96 dB(A) 98 dB(A)
Vibration
a
h
Front-assist
Handle 3.2 m/s
2
K=1.5 m/s
2
2.8 m/s
2
K=1.6 m/s
2
Rear Handle
2.3 m/s
2
K=1.5 m/s 2
3.1 m/s
2
K=1.6 m/s 2
◾
The declared vibration total value has been measured
in accordance with a standard test method and may be
used for comparing one tool with another.
◾
The declared vibration total value may also be used in
a preliminary assessment of exposure.
NOTICE:
The vibration emission during actual use of the
power tool can differ from the declared value in which the
tool is used; In order to protect the operator, user should wear
gloves and ear protectors in the actual conditions of use.
DESCRIPTION
KNOW YOUR LINE TRIMMER (Fig. A1)
1. Threshold Ring
2. Trigger
3. Rear Handle
4. Air Inlet
5. Lock-Off Button
6. High/low-Speed Switch
7. Shoulder-Strap Mount Hanger
8. Adjustable Front-Assist Handle
9. Shoulder Strap
10. Multi-Function Wrench
11. Hex Wrench
12. Trimmer Head (Bump Head)
13. Cutting Line
14. Release Tab
15. Line-Cutting Blade
16. Guard
17. Ejection Mechanism
18. Electric Contacts
19. Latch
20. Rubber Pad Protection
21. Battery-Release Button
22. Safety barrier bar (For brush cutter head only)
23. Locking pole for safety barrier bar (For brush
cutter head only)
24. Out flange (For brush cutter head only)
25. Nut (For brush cutter head only)
26. Screws(For brush cutter head only)
PACKING LIST
PART NAME QUANTITY
Line Trimmer 1
Guard 1
Front-assist handle assembly 1
Hex wrench 1
Multi-function wrench 1
Shoulder strap 1
Operator's manual 1
Locking pole 1
Out flange 1
Nut 1
screw 2
ASSEMBLY
MOUNTING THE GUARD
1. Loosen and remove the two screws from the guard
(Fig. B).