EGO HTX7500, Operator'S Manual

Page: 8 / 276

56 VOLT LITHIUM-ION CORDLESS HEDGE TRIMMER — HTX6500
/
HTX7500
8
EN
◾
Only use the hedge trimmer with the guard properly
assembled. The use of the hedge trimmer without the
proper guard may result in serious personal injury.
◾
Use both hands when operating the hedge trimmer.
Using one hand could cause loss of control and
result in serious personal injury.
IMPORTANT SAFETY INSTRUCTIONS
◾
Do not charge the battery pack in rain, or in wet
locations.
◾
The battery pack must be removed from the appliance
before it is scrapped.
◾
Do not grasp the exposed cutting blades or cutting
edges when picking up or holding the hedge trimmer.
◾
Do not use on a ladder, rooftop, tree, or other unstable
support. Stable footing on a solid surface enables
better control of the hedge trimmer in unexpected
situations.
◾
Never allow children to operate the hedge trimmer.
◾
Never remove or tamper with safety devices. Check
their proper operation regularly. Never do anything to
interfere with the intended function of a safety device
or to reduce the protection provided by a safety device.
◾
Check the blade and motor mounting bolts at frequent
intervals for proper tightness. Also, visually inspect
blade for damage (e.g., bent, cracked, and worn).
Replace the blade only with a blade from EGO
TM
.
◾
Replace the blade if it is bent or cracked. An
unbalanced blade causes vibration that could damage
the motor drive unit or cause personal injury.
◾
If the equipment should start to vibrate abnormally,
stop the motor and check immediately for the
◾
The trimmer shall be used to cut stems less than
(33mm) thick.
◾
Do not wash with a hose; avoid getting water in motor
and electrical connections.
◾
Follow instructions for lubricating and changing
accessories.
◾
Keep handles dry, clean and free from oil and grease.
◾
Save these instructions. Refer to them frequently and
use them to instruct others who may use this tool. If
you loan this tool to someone else, also loan these
instructions to them to prevent misuse of the product
and possible injury.
SAVE THESE INSTRUCTIONS!
SPECIFICATIONS
Voltage
56V 56V
Blade speed 1800/min 1800/min
Blade length 65cm 75cm
Cutting capacity 33mm 33mm
Blade Model
AHB6500S AHB7500S
AHB6500
(Hardened) AHB7500
(Hardened)
Tool weight 3.9kg 4.0kg
Recommended Operating
Temperature
0°C-40°C 0°C-40°C
Recommended Storage
Temperature
-20°C-70°C -20°C-70°C
Measured sound power
level L
WA
90.1 dB(A)
K=2.9 dB(A) 95.4 dB(A)
K=1.52 dB(A)
Sound pressure level at
operator’s ear L
PA
80.1 dB(A)
K=3 dB(A) 83.9 dB(A)
K=2.5 dB(A)
Guaranteed sound power
level L
WA
(according to 2000/14/EC)
93 dB(A) 97 dB(A)
Vibration a
h
Rear Handle
3.2m/s²
K=1.5m/s
2
2.872m/s²
K=1.5m/s
2
Front Handle
3.9m/s²
K=1.5m/s
2
3.536m/s²
K=1.5m/s
2
◾
The declared vibration total value has been measured
in accordance with a standard test method and may be
used for comparing one tool with another.
◾
The declared vibration total value may also be used in
a preliminary assessment of exposure.
NOTICE:
The vibration emission during actual use of the
power tool can differ from the declared value in which the
tool is used; In order to protect the operator, user should wear
gloves and ear protectors in the actual conditions of use.
PACKING LIST
PART NAME QUANTITY
Hedge Trimmer 1
Shield 1
Operator’s Manual 1