5.2.3 TH Models: Dew Point Alerts
⚠
Information
Please make sure that you use a decimal point in order to
separate the decimal digits when entering all the following
values.
Dew point alerts are configured on the page
Sensors / Dew
point
.
1.
Please enter the number of seconds after which an alert
is triggered in the input field
Alert delay
, if you wish to
allow for short-term transgressions.
2.
Enter the
Lower limit
that will trigger an alert if the dew
point drops below this threshold.
3.
Enter the
Upper limit
that will trigger an alert if the dew
point rises above this threshold.
4.
Enter a reasonable value for the
Dead-band
, for instance
2.
5.
Click
Save
to apply your changes.
Configuring Alerts
44