The corresponding symbol flashes red, when an alert occurs.
The following symbols can be shown:
Alert
Symbol
Value above upper limit
↥
Value below lower limit
↧
Value rising too quickly
↑
Value falling too quickly
↓
Sensor failure
✖
7.1.2 Viewing Recent Sensor Events
The 16 most recent events, such as alerts, values returning
to their normal state or sensor failures, can be viewed in the
configuration area.
Open the page
Maintenance / Events
.
7.1.3 Viewing Logged Data
The chart on the home page displays the values that have
been tracked up until the present moment.
The lines displayed in full color show the logged average
values
(1)
. The lighter areas around the lines
(2)
represent
the minimum and maximum values recorded in the specific
timeframe.
The horizontal bars represent the limit values at which alerts
are triggered. Their width corresponds to the specified dead
band.
Data Access
64