58
1
4
2
3
Operator’s Manual City Ranger 2260
Operator’s Manual City Ranger 2260
+ terminal Battery - terminal
Service and maintenance
3.10 Battery
Attention
Observe the following when
removing a battery:
1. The machine main switch must be switched
off. (Picture 2)
2. Remove the cables from the battery terminals
first.
3. Avoid short-circuits across the battery
terminals or inadvertently connecting/short-
circuiting the b terminal to some other
part of the machine (Short-circuiting will cause
sparks).
4. Avoid sparks, fires, and other sources of
ignition. Do not smoke.
5. When the battery is to be reconnected,
connect the + terminal first, followed by the
– terminal.
Put on the terminal protection cover.
Attention
Sulphuric acid is hazardous and can
cause loss of sight or serious burns
and generates volatile gases.
Battery charging
The battery charger terminals are connected to
the battery so that the + terminal is connected
to the battery’s + terminal, and the - terminal is
connected to the battery’s – terminal.
Battery fluid level
The battery is maintenance free, only check the
green lamp on battery. (Picture 4)
Green lamp
Battery
Main switch – ON
Main switch – OFF
Summary of Contents for City Ranger 2260
