Egholm City Ranger 2260, Operator'S Manual

Page: 34 / 72

34
1
2
3
4
Operator’s Manual City Ranger 2260 Operator’s Manual City Ranger 2260
General information
1.21 Removing the cab/roll bar
1. Remove the doors from the cab to reduce the
weight to be lifted (cab only).
2. Remove the air-intake grate on the rear of the
front screens.
3. Disconnect the three connectors on the
cables leading to the cab/roll bar. (Picture 1)
4. Unscrew the four bolts behind the driver’s
seat (two on each side), and remove the safety
belt and lock. (Picture 2)
5. Loosen the two bolts under the base plate at
the front of the machine. (Picture 3)
6. Tip the cabin/roll bar forwards so that the
sealing strip can be removed. (Picture 4)
3 connectors behind grate
Loosen the 2 bolts on each side
Bolts under base plate
Remove sealing strip