background image

14

Operator´s manual City Ranger 2250 Snow blower

Drive

6.4   Ejection door adjustment

See operating instructions of the basic machine

Adjust the ejection door and set the throwing
distance by activating the switch (C).
• 

Pos. 1 = Door upwards.

• 

Pos. 2 = Door downwards.

The steeper the door is adjusted, the higher and
farer the snow will be projected.

 WARNING

Projected parts

Projected parts may hit persons, animals and objects.
• 

Do not point the discharge chute in direction of people, animals and objects.

• 

Keep people away from the danger zone.

6.5   Switching on and off the blower drive

See operating instructions of the basic machine

The blower drive can be switched on and off by
activating the switch (D).
• 

On = Blower drive on

• 

Reverse/off = Blower drive off.

 WARNING

Projected parts

Projected parts may hit persons, animals and objects.
• 

Do not point the discharge chute in direction of people, animals and objects.

• 

Keep people away from the danger zone.

13

Masch-Nr. ab  YO1001

C

Pos.1

Pos.2

D

13

Masch-Nr. ab  YO1001

C

Pos.1

Pos.2

D

!

!

Summary of Contents for City Ranger 2250





























Reviews: