9
Cleaning and maintenance
5. Cleaning and maintenance
Entrance areas are to be equipped with a reasonably sized dirt-trapping zone / mat.
For commercial applications where the flooring area directly adjoins the outdoor area, a recessed and reasonably sized dirt-
trapping zone is to be fitted in the flooring design.
Attach felt pads to the feet of furniture, including chairs and tables. Clean these regularly, check for proper functionality, and
replace if required.
Lift furniture when moving, rather than pushing or dragging.
On office chairs and all other furnishings on rollers, soft castors (type W) are to be used. The office chair and furniture rollers are
to be cleaned at regular intervals, tested for functionality and replaced if necessary.
Remove any moisture / wetness resting on the laminate and Comfort flooring immediately.
Steam cleaners should not be used, the exception being on Aqua+ Laminate Flooring.
Only clean laminate and Comfort flooring with a damp cloth.
Never use scouring or abrasive materials on laminate and Comfort flooring.
Do not use cleaning products that may leave a residue. We recommend our system-related flooring cleaner, Clean-it, from EGGER.
Waxing and / or polishing is neither necessary nor permitted.
Subsequent sealing of the surface on laminate and Comfort flooring is not necessary and must not be done.
Use the hard floor nozzle (brush accessory) when vacuum cleaning.
If, despite its robustness, a flooring board gets damaged, then minor damage can be rectified with the system-specific repair paste,
EGGER Decor Mix & Fill. If the damage is more serious, a professional installer will be able to replace an entire panel. Separate
instructions are available upon request.
In case of special installations, such as on stairs, or if you have any other questions, please contact your dealer.
