Dodge Cummins User Guide
- 16 -
www.efilive.com
Important note for tuners:
If running a CSP
5
tune and it does not seem to be switching as expected please
check the data in the "AIRDENSC_F" PID. For CSP
5
to work correctly the
"AIRDENSC_F" PID must be in 'Normal Mode." If any other modes are active
(e.g. Protection Mode) then the ECM will not be using normal Altitude based
tables, and therefore will not using the CSP
5
tables.
Protection Mode is a direct result of tuning strategy or DPF regen states.
Pass-Thru Read a Controller (CMB and CMC only)
Follow these steps to read the selected controller.
1. Connect your FlashScan/AutoCal device to your PC and vehicle.
2. Turn the vehicle ignition to the
On
position (vehicle must not be
cranked/running when reading).
3. Open the EFILive V8 Scan and Tune application.
4. Select the [F3: Tune] option in the left-hand pane.
5. On the [F2: Read] menu, select your controller(s) by using the [Auto Detect]
button, or;
1. Hover over the Engine Controller box, and
right click on the
“Right-click
to select engine-controller
” box and manually select the ECM.
2. Navigate and select the correct controller.