Cummins 6.7L CM2350B CSP5
User
Guide
- 15 -
www.efilive.com
MUST select the entire EDA PID Group and flash a CSP5 operating system into
the ECM for effective data logging.
Configure Tuning
To configure flashing of CME controllers on your FlashScan/AutoCal device;
1. Select the [F3: Tune] option in the left-hand pane.
2. Remove any unnecessary controller configurations to ensure capacity
restrictions are not exceeded.
3. Add your chosen controller(s) to your list;
a. Press the green '+' icon.
b. Right click on the Engine Controller box.
c. Navigate to Select CME.
d. Select OK.
Tune File Switching
To configure the switching of CSP
5
tune positions on your FlashScan/AutoCal
device;
1. Select the [F4: Switch] option in the left-hand pane.
2. Enter switchable tune names as appropriate.
Configure DTCs
To configure the display of trouble codes and descriptions onto FlashScan;
1. Select the [F5: DTC's] option in the left-hand pane.
2. Select appropriate DTC options.
Quick Setup
To configure BBX settings, device settings, and configure tune files for BBX;