Cummins 6.7L CM2350B CSP5
User
Guide
- 10 -
www.efilive.com
CSP
5
CAN Tunes
The CSP
5
tunes labelled "Program #1 to Program #4" are all switched via a device
on the CAN bus.
NOTE: Whenever the ECM is reflashed tune switching will default to using CSP
5
Program #4 unless the Default CSP Tune After Reflash parameter is set.
Supported Switching Methods
EFILive’s CSP
5
custom operating system can be switched using EFILive
FlashScan/AutoCal V3, FlashScan/AutoCal V2, and the SoCal Diesel CSP
5
switch
and the Starlite Diesel StarLog.
EFILive recommends that customers confirm that their chosen integration product
is approved for use.
To setup an approved integration product, users should:
1. Convert their base file to a CSP
5
operating system, as described in this
document.
2. Edit tune parameters as necessary and save the file.
3. Flash their modified file into their ECM using the V8 Scan and Tune
application as described in this document. (Specific selection of 3
rd
party
product is NOT required in tune file).
4. Setup the 3
rd
party device as per the manufacturer’s instructions.
