
Document ID: OMM-00148 Rev. B
61
6.1.4 Purge and Sweep Print Heads
To ensure the best print quality, EFI recommends that operators purge and clean print heads prior to each print run. At
minimum, a purge and sweep should be run at start-up and every 8 hours of operation. The print heads should be purged and
a head sweep should be performed in one of two ways:
1. From the EFI Pro 24f Control screen, choose the Purge White icon to white print heads. The system automatically follows this up
with a head sweep.
2. b. From the EFI Pro 24f Control screen, choose the Purge Color icon to purge the CMYK print heads. The system automatically fol-
lows this up with a head sweep.
1
2
3
Figure 6-6: Purge and Sweep Icons on EFI Pro 24f Control Screen
3. Use the manual Ink Purge buttons located in the carriage HOME compartment (See
Figure 6-7
). Then follow up with a head sweep
performed from the EFI Pro 24f Control screen.
1
2
3
Figure 6-7: Manual Ink Purge Buttons
1
Purges white (or other non-CYMK)
ink and conducts a head sweep
2
Purges CYMK ink and conducts a
head sweep
3
Conducts head sweep
1
Purges CYMK ink
2
Liquid Separator: empties
the cyclonic vacuum system
3
Purges white (or other non-CYMK) ink.
(Label changes for non-white ink printers.)