10
3.1.2. TX3000 Cable Synchronization
Input setting (slave)
•
J14 must be 2-3 IN
•
J15 must be 1-2 IN
•
must be connect by twisted-pair
The system can provide two sets of cable in.On the board of TX3000,it is annotated as
X3(Cab In), N0. 1 and 2 of X3 is the first group ,and N0. 3 and 4 is the second group.You
only need one group in actual use.Each cable in should connect to the corresponding
sockets. E.g. If you use the first group of cable, you should connect the N0.1 and 2
sockets of X3
（
refer to the figure of TX layout 2).
