Eelectron Spa
IN00B02WEBFI00060140_KNX_MANUAL.DOCX
28/42
KNX SCENARIOS
Introduction
1-byte KNX objects can be configured to operate in the ETS project as scenarios; in this case, the
value sent on the bus is not a status but a number – typically between 1 and 64 – that identifies, in
the KNX devices associated with the scenario, the configuration (previously stored) to which they
must be taken, .
Configuring a KNX scenario
To configure a KNX object as a scenario within HORIZONE SERVER, you must:
●
Access its tab in the CONFIGURATION environment
●
Enable ADVANCED access level
●
Ensure ETS ENCODING is “numeric value (1 byte)"
●
Select “SCENARIOS” as “FUNCTION” (if not available, temporarily change the ETS
ENCODING to a different entry and select “numeric value (1 byte)” again)
●
Select an ICON from those available for KNX scenarios through the appropriate pop-up
window, as previously outlined
●
Set the value to be sent on the KNX bus by pressing the scenario button in the “KNX
SCENARIO VALUE” field that is only available by choosing the “SCENARIOS” function
After the configuration has been completed, the KNX scenario object looks like this:
