Eelectron Spa
IN00B02WEBFI00060140_KNX_MANUAL.DOCX
18/42
If the list contains a large number of objects with a similar name that were not initially included in
ETS rules, you can still enter a new rule - or modify an existing rule - at this stage to automate the
recognition of new objects.
To do this:
●
Press the “EDIT RULES” button; the ETS rules page opens in another TAB
●
Modify ETS rules as needed
●
Return to the ETS import TAB and press the “RECALCULATE RULES" button
●
Repeat the procedure if necessary
Once all objects have been configured, press "NEXT” to finish importing.
The software allows you to end the import procedure without assigning a graphical icon to
one or more objects; however, this choice is not recommended, as these objects will not
be displayed correctly once they are entered in the supervision graphics pages. You can
still change the icon (and hence the graphic appearance) of the imported objects later,
through their tab.
At the end of the procedure, the imported objects are available in the section of the navigation tree
under TECHNOLOGIES → KNX → ETS PROJECT; the tree structure of this section replicates the
hierarchy of KNX addresses present in the ETS project and can be used to selectively access the
configuration tabs of KNX objects created in the software by the import procedure.
Selective import
You can import only a portion of an ETS project by manually choosing which KNX group addresses
to transform into HORIZONE SERVER objects. This can be useful when:
●
The project has already been imported previously and only targeted changes have been
made to a subset of addresses and you do not want to lose any customisations applied to
the other addresses within the supervision
●
Certain addresses in the ETS project should not be managed by supervision
●
The number of addresses in the ETS project exceeds those which can be managed by
HORIZONE SERVER based on the version/ license
To enable this mode, select the CHOOSE WHICH ADDRESSES TO IMPORT option before starting
the procedure; a list of the group addresses in the project is shown, divided by intermediate group:
