8
2. Getting Started
This section contains information for the unpacking, inspection, preparation for use
and storage of your eec product.
2.1 Unpacking and Inspection
2.1.1 Packaging
Your instrument was shipped in a custom foam insulated container. If the shipping
carton is damaged, inspect the contents for visible damage such as dents, scratches
or a broken display. If the instrument is damaged, notify the carrier and Associated
Research, Inc.’s customer support department.
Please save the shipping carton
and packing material for the carrier’s inspection.
Our customer support
department will assist you in the repair or replacement of your instrument. Please do
not return your product without first notifying us.
Please retain all of the original packaging materials.
Inside the carton should be the following:
DESCRIPTION
eec PART NUMBER
Instrument
ESD-140
Cable ASSY High
Current Output
1137 Current with Kelvin
Cable ASSY High
Current Return
1138 Return with Kelvin
Fuse
10 Amp, Slow Blow
250VAC
Power Cord
Standard
Interlock Connector
1505
Only accessories that meet the manufacturer’s specifications shall be
used.
2.1.2 Returning the Instrument
When it is necessary to return the instrument for servicing or calibration, repackage
the instrument in its original container, please include all accessories and test leads.
Indicate the nature of the problem or type of service needed. Also, please mark the
container "FRAGILE" to insure proper handling.
If you do not have the original packaging materials, please follow these guidelines:
Wrap the instrument in a bubble pack or similar foam. Enclose the same
information as above.
Use a strong double-wall container that is made for shipping instrumentation. 350
lb. test material is adequate.
Use a layer of shock-absorbing material 70 to 100 mm (3 to 4 inch) thick around all
sides of the instrument. Protect the control panel with cardboard.
Seal the container securely.
Mark the container "FRAGILE" to insure proper handling.
WARNING
