Edwards PGC201, Instruction Manual

Page: 37 / 68

D0300040001EN - Operation
Page 27

The Para indicator flashes for the selected channel.

Press the (PARA) pushbutton for about 2 seconds.

The parameter menu has now been invoked.

Use the arrow pushbuttons to select the desired parameter group.

The name of the parameter group is displayed.

Press the (PARA) pushbutton to select the desired parameter.

The name and the value of the parameter are displayed.

Use the arrow pushbuttons to change the value of the parameter.

The value of the parameter is changed.

Repeat the last 2 steps to change further parameters from the same parameter group.
After having accessed the last parameter of a parameter group, the instrument will switch
back to the measurement mode. Changes to the parameters become effective immediately
and are automatically saved to the EEPROM.
When the instrument is running in the parameter mode and if for a period of 10 seconds no
changes are made to the parameters, then the instrument will automatically return to the
measurement mode. Any parameter changes made up to this point are automatically saved
to the EEPROM.
Note:
When the instrument is running in the parameter mode, and when not entering a change for
more than 10 seconds, then the instrument will automatically return back to the measurement
mode.
Any changes, which have been entered and confirmed up to this point of time, are
automatically saved in the EEPROM.