EDT, Inc.
2019 April 29
37
VisionLink F-series
Revision Log
Revision Log
Below is a history of modifications to this guide.
Date
By
Rev.
Pp
Detail
20190429
BB,CH
0012
18-19
Updated line scan external trigger passthrough to use CL_CFG_NORM: 04 and
continuous: 1. Updated company address.
20160822
PH,RH
0011
6
Under Included Files, revised introductory text as follows:
“
For products covered in this
guide, your EDT installation package includes device drivers for supported operating
systems, as well as
For the above products, your EDT installation package includes
README files for quick start information and special cases (
README.*
), as well as
device drivers for supported operating systems and
source code and binaries
for...”
20160822
PH,RH
0011
8-9
Under Installation, added details about silent vs. standard installation of software.
20160822
PH,CH
0011
19
Under External Triggering Pins, revised this paragraph as shown...
“Fire the trigger by applying a TTL signal lasting
10 microseconds
at least 200
nanoseconds
to these pins, which in turn will output a signal of the appropriate level to
a camera control line, typically CC1. The trigger cable can drive either pin high with
respect to the other; no particular polarity is required
.”
20160303
PH,RH
0010
All
Changed “DMA channel(s)” to “channel(s).
6
Included Files: At end, added bullet about Windows silent install.
9-10
Image Capture and Display GUI(s): Deleted the
“s”
in that heading since pdvshow is no
longer mentioned there, so there’s only one GUI covered under it. Also deleted “To
invoke vlviewer, enter vlviewer from a command line in a terminal window, or, in
Windows, from the vlviewer desktop icon. To see the available command-line options,
enter vlviewer --help from a Pdv Utilities command window or Linux terminal window in
the installation directory. A comprehensive user guide for vlviewer is available via the
application's Help
menu.”
and replaced
“To
specify options,
run...”
with
“To
invoke with
other than the default (0,0) unit and channel, run...”
20160129
PH,RH
0009
Title
Product photo: Replaced older green boards with newer blue boards.
All
Deleted all data for Mac, and most for (legacy) pdvshow except some in: Image Capture
and Display GUIs; Units, Connectors, Channels; Example and Utility Applications.
6
Overview: Table 1 - updated headings; Included files - updated bullets.
7
Related Resources: Updated links.
9
Setting the Camera Model: Table 3 -
updated “command
-
line” data; deleted Mac data.
9-10
Image Capture & Display GUIs: Updated introductory text and bullets (before Figure 1
of vlviewer) and last sentence about vlviewer help.
11
Units, Connectors, Channels: Updated text about apps defaulting to unit 0, connector 0.
22
Programming: Building or Rebuilding an Application, Table 6 - put makefile method first,
before Windows Visual Studio method; under Compiling vlviewer - updated Qt details.
Firmware: Dropped “PCI” from “PCI / PCIe” reference.
28
Problems with Software Installation [Linux]: Corrected
“rpm
-
erase...’
to
“rpm
--
erase...”.
20141110
PH,RH
0008
Title
Deleted unused document number (008-xxxxx-xx).
All
Conformed “framegrabber” to “frame grabber” and “fiberoptic” to “fiber
-
optic.”
11-12
Added LED information:
–
p. 11, Units, Connectors, and Channels: Added LED detailsin Figure 2.
–
p. 12, LEDs: Added this new section.
22
Building or Rebuilding an Application: Added note re. 32- vs. 64-bit.
20140922
PH,CK
0007
22
Compiling vlviewer, para1: Corrected
apt-get install qt-4-dev-tools
to
apt-get install qt4-dev-tools
.
20140818
PH,CH
0006
6
Overview, Table 1, VisionLink F1 full-height: Corrected part #s to -14836 and -14852.
20140729
PH,CH
0005
6
Overview: Added Table 1 (part numbers and descriptions).
20140729
PH,CH
0005
32,34
Additional External Inputs (top) & Appendix C (top): slightly clarified timestamping text.
20140713
PH,RH
0005
13
Serial Communication > From Camera Manufacturer’s Application: Added Note.
