EDT VisionLink F Series, User Manual

Page: 31 / 38

EDT, Inc. 2019 April 29 31
VisionLink F-series Appendix B: Diagrams
–
Boards and Cabling
Additional External Inputs
Via Berg or Optional Lemo Connector
VisionLink frame grabbers offer two connectors that can be used for external control (triggers and other inputs, such as
IRIG-B for timestamping): one Berg, and one optional seven-pin Lemo. Pin assignments are shown below.
BERG CONNECTOR [STANDARD] Pin VisionLink F1 VisionLink F4
1 Trigger 0+ Trigger 0+
2 Trigger 0- Trigger 0-
3 Trigger 1+ Trigger 1+
4 Trigger 1- Trigger 1-
5 Reserved or (optional) IRIG-B IRIG-B
6 3.3V 3.3V
7 Reserved Reserved
8 Reserved Reserved
9 Reserved Reserved
10 Ground Ground
LEMO CONNECTOR [OPTIONAL]
Pin VisionLink F1 VisionLink F4
1 Trigger 1+ Trigger 1+
2 3.3V 3.3V
3 Trigger 0+ Trigger 0+
4 Trigger 0- Trigger 0-
5 IRIG-B IRIG-B
6 Trigger 1- Trigger 1-
7 Ground Ground
Via Optional Cable Assembly
An optional EDT-built cable assembly is available for triggering, timestamping, or both; below are the pin assignments
(see also
Appendix C: Timestamping ).
EDT p/n 016-13840 (June 2010) [color] Lemo D9 Function BNC BNC Label
: green 1 2 trigger 1+ center conductor TRIG 1
red 2 9 reserved
– –
orange 3 7 trigger 0+ center conductor TRIG 0
brown 4 8 trigger 0- shield TRIG 0
white 5 4 IRIG IN center conductor IRIGB
blue 6 3 trigger 1- shield TRIG 1
black 7 5 ground shield IRIGB
For length, Lemo to D9 = 1 ft.; three BNCs out to D9 = each 6 in. or less.
1 6
2
7
5
3 4
2 4 6 8 10
1
3 5 7 9