EDT PCIe8g3 A5 10G User Manual Download Page 33 | Manualshive

Page: 33 / 48

background image

APPENDIX A: Registers for PCIe8g3 S5

Registers, Port: Ports 0–3 (SFPs)

EDT, Inc.

2017 January 04

33

0x800020, 810020, 820020, 830020 Last B1 Error

0x800024, 810024, 820024, 830024 B1 Error Count

0x800028, 810028, 820028, 830028 B2 Error Count

0x80002C, 81002C, 82002C, 83002C M1 Error Count

Access / Notes:

32-bit read-only

0x800020 (Port 0): STRATIX5_REGXL8(STRATIX5_LAST_B1_ERR, 0)
0x810020 (Port 1): STRATIX5_REGXL8(STRATIX5_LAST_B1_ERR, 1)
0x820020 (Port 2): STRATIX5_REGXL8(STRATIX5_LAST_B1_ERR, 2)
0x830020 (Port 3): STRATIX5_REGXL8(STRATIX5_LAST_B1_ERR, 3)

Bit

Access

Name

Description

31–8

–

–

Reserved.

7–0

R only

[no name]

The value of the error mask for the last B1 error. A B1 error mask is one byte resulting from a logical
operation on the previous frame. Errors occurring regularly in the same bit of the byte can indicate a
problem in the sender’s or receiver’s equipment. If errors are occurring on the fiber, the B1bits in error
are more likely to be randomly located in the byte.

Access / Notes:

32-bit read-only
0x800024 (Port 0): STRATIX5_REGXL8(STRATIX5_B1_ERR_CNT, 0)
0x810024 (Port 1): STRATIX5_REGXL8(STRATIX5_B1_ERR_CNT, 1)
0x820024 (Port 2): STRATIX5_REGXL8(STRATIX5_B1_ERR_CNT, 2)
0x830024 (Port 3): STRATIX5_REGXL8(STRATIX5_B1_ERR_CNT, 3)

Bit

Access

Name

Description

31–24

–

–

Reserved.

23–0

R only

[no name]

The number of B1 bits found to be in error since the counter was last reset.

Access / Notes:

32-bit read-only
0x800028 (Port 0): STRATIX5_REGXL8(STRATIX5_B2_ERR_CNT, 0)
0x810028 (Port 1): STRATIX5_REGXL8(STRATIX5_B2_ERR_CNT, 1)
0x820028 (Port 2): STRATIX5_REGXL8(STRATIX5_B2_ERR_CNT, 2)
0x830028 (Port 3): STRATIX5_REGXL8(STRATIX5_B2_ERR_CNT, 3)

Bit

Access

Name

Description

31–0

R only

[no name]

The number of B2 bits found to be in error since the counter was last reset.

Access / Notes:

32-bit read-only

0x80002C (Port 0): STRATIX5_REGXL8(STRATIX5_M1_ERR_CNT, 0)
0x81002C (Port 1): STRATIX5_REGXL8(STRATIX5_M1_ERR_CNT, 1)
0x82002C (Port 2): STRATIX5_REGXL8(STRATIX5_M1_ERR_CNT, 2)
0x83002C (Port 3): STRATIX5_REGXL8(STRATIX5_M1_ERR_CNT, 3)

Bit

Access

Name

Description

31–24

–

–

Reserved.

23–0

R only

[no name]

The number of M1 bits found to be in error since the counter was last reset. The M1 byte is sent from
the remote receiver of the signal, if that remote receiver has detected a B1 error. In that case, the B1
error mask is copied and sent back as the M1 byte.

«
...
31
32
33
34
35
...
»

Summary of Contents for PCIe8g3 A5 10G

















































Reviews:

No comments

Related manuals for PCIe8g3 A5 10G

Brand: Gigabyte Pages: 40

Brand: Sunrich Tech Pages: 11

Brand: AJA Pages: 82

iCLASS SE Biometric Reader

Brand: HID Pages: 50

Brand: Broadcom Pages: 18

MRW62ES1181 - Card Reader USB

Brand: Sony Pages: 2

Brand: Sony Pages: 2

Brand: Sony Pages: 2

Octopus Mobile Reader

Brand: Sony Pages: 4

Brand: Sony Pages: 2

Brand: Sony Pages: 2

Brand: Sony Pages: 5

Brand: Sony Pages: 16

Brand: Sony Pages: 21

Brand: Sony Pages: 19

Brand: Sony Pages: 21

Brand: Sony Pages: 68

Brand: Sony Pages: 72

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands