33
SPEED Sensor BOLT Installation
BOLT SENSOR - JAKE’S DISC
BRAKES:
EZGO SHOWN (others similar):
Secure the cable with cable
clamps. Watch for CHAFFING
points that may damage the ca-
ble. Always use TWO cable ties
side by side (should one break in
the future)
CAUTION: THE CABLE MUST
NOT CONTACT THE MOVING
STEERING KNUCKLE OR TIRE!
Route the cable to prevent con-
tact with the wheel. The full LEFT
and full RIGHT turn stops should
be checked to ensure the cable is
not pinched, binds, or rubs.
ROTATE THE STEERING FULL
LEFT LOCK TO FULL RIGHT
LOCK, CHECK FOR CABLE
PINCH HAZARDS!
Feed the connector over the TOP
of the steering column. Let cable
hang for now. (as shown in the
Temp Extension Cable Installa-
tion section)
Summary of Contents for EX-RAY
Page 6: ...Specifications 6...
Page 7: ...7 Specifications...
