BOLT SENSOR - CABLE
ROUTING (ALL EZ, YAM G2 -
DRIVE, etc.)
Route the cable to prevent con-
tact with the wheel. The full LEFT
and full RIGHT turn stops should
be checked to ensure the cable is
not pinched, binds, or rubs.
CAUTION: THE CABLE MUST
NOT CONTACT THE MOV-
ING STEERING KNUCKLE OR
TIRE!
Secure the cable with cable
clamps. Watch for CHAFFING
points that may damage the ca-
ble. Always use TWO cable ties
side by side (should one break in
the future)
ROTATE THE STEERING FULL
LEFT LOCK TO FULL RIGHT
LOCK, CHECK FOR CABLE
PINCH HAZARDS!
Feed the connector over the TOP
of the steering column. Let cable
hang for now. (as shown in the
Temp Extension Cable Installa-
tion section)
31
SPEED Sensor BOLT Installation
Summary of Contents for EX-RAY
Page 6: ...Specifications 6...
Page 7: ...7 Specifications...
