16
Trouble Shooting
Problems frequently encountered
Proper Voltage is not reached or
Causes
bad magnetisation or demagnetisation
-Slipping Belts
-Low RPM
-Bad Connection(s)
-Generator is
too small
-Faulty Brushes
-Insufficient Voltage
-Electronic circuit Fuses.
The voltage is good but there is a lack
of amperage or the electromagnet does
-A bad connection
not lift enough material.
-
and/or the resistance of
the electromagnet
Tth output voltage is unstable.
-Check if field volt is less than
125v Then the RPM is to low.
The demagnetisation is not constant
-verify the brushes
-insufficient RPM
