Configuring the
Network
4-15
Connecting to an Ethernet Network
OS/2 Version 1.x
If you’re using OS/2 version 2.
x
, skip to the next section.
»
Note:
This is the standard method of adding a printer in OS/2
version 1.x. The procedure is repeated here for your convenience.
Add a Printer
1
With the Print Manager open, from the Setup menu choose
Printers...
2
In the Printers dialog box, choose Add...
»
Note:
If you’re working with an existing printer, select the printer
name and choose Change.
The Add Printer (or Change Printer) dialog box appears.
3
In the Name field, type the printer name (only if you are add-
ing a printer).
The printer name is local to the workstation and is used to associ-
ate queues with physical printers. It can be the same as the name
used at the printer.
4
In the Device box, select the printer’s pipe name.
Pipe names have the form \PIPE\QMS_
name
where
name
is the
printer’s default hardware address or the printer name set in the
“Configuring the Interface” section, earlier in this chapter.
5
Select IBMNULL as the printer driver.
6
If appropriate, fill in the Description and Printer Timeout
Transmission Retry boxes.
7
Choose Add... to return to the Printers dialog box.
»
Note:
If you’re working with an existing printer, choose Change.
8
In the Printers dialog box, choose OK to return to the Print
Manager.
Add a Print Queue
1
With the Print Manager still open, from the Setup menu
choose Queues...
EDNord - Istedgade 37A - 9000 Aalborg - telfon 96333500
Summary of Contents for QMS 1060E
