EDNord QMS 1060E, Getting Started

Page: 44 / 120

Printing a
Start-up Page
QMS 1060E Print System Getting Started
2-18
Printing a Start-up Page
When you turn on the printer, a start-up page prints. This page gives
you an overview of your QMS 1060E Print System.
The following information prints on the start-up page:
n
Printer product name
n
Cumulative number of printed sheets
n
Amount of resident RAM (in megabytes)
n
Number of PostScript typefaces in ROM
n
Default resolution
n
Software version, revision, and release numbers
n
Firmware level number
n
Hard disks or cartridge attached, if any
n
Emulation and protocol information of all standard and optional
interfaces
» Note: When an Intellifont SIMM is installed the following appears in
the Options section of the start-up page even though you have only
one installed:
%cartridge1%
%cartridge%
If the start-up page prints with all the start-up page information, and
the print quality is good, go to chapter 3, “Connecting to a PC,” or to
chapter 4, “Connecting to an Ethernet Network,” of this manual,
depending on your computer platform.
If you purchased any printer options, you can install them now. If
installation instructions are included with your option, follow them. If
not, installation instructions are included in chapter 6, “Printer
Options,” of the
Reference guide.
If a start-up page does not print, see chapter 6, “Troubleshooting,” of
the
Operation guide for more information on printing a start-up page.
EDNord - Istedgade 37A - 9000 Aalborg - telfon 96333500