EDNord QMS 1060E, Getting Started

Page: 55 / 120

Testing
Communication
3-9 Connecting to a PC
If the printer’s serial port settings are different from your PC’s
settings, use the printer control panel, as described in the fol-
lowing section, “Changing Serial Port Settings,” to make them
match.
Changing Serial Settings
Since your printer is configured at the factory for the most typical
printing environments, the serial settings in your AUTOEXEC.BAT file
and on the start-up page should be the same. However, if they differ,
you must configure the printer to use the serial settings specified in
the AUTOEXEC.BAT file.
Press the following control panel keys in the order shown:
Press
this
key...
to... For 1.5 seconds,
the message
window reads ... and then it reads
...
Online/
Offline Turn off the
Ready indicator
and enable
printer
configuration.
IDLE
Menu Access the
configuration
menu.
CONFIGURATION OPERATOR
CONTROL
Next
Advance to the
Administration
menu.
ADMINISTRATION
Select Access the
Administration
menu.
COMMUNICATIONS
EDNord - Istedgade 37A - 9000 Aalborg - telfon 96333500