Solution-8 Operators Manual
Page
7
MA800O3C.DOC
Electronics Design & Manufacturing
Mains Indicator
The MAINS indicator is used to indicate that the system mains power is normal or has
failed.
Indication
Definition
Flashing
Power Failure
On
Power Normal
Fault Indicator
The FAULT indicator is used to indicate that the system has detected a battery fault and
that you should contact your installer.
There are however some modes of operation such as changing a user code where the
FAULT indicator is used to represent the digit '9'. This should not be considered as a
fault but interpreted as intended, according to the current mode of operation.
Indication
Definition
Off
System Normal
On
System Failure or displaying the digit '9' during programming
Audible Indications
In general the audible indicators given out by the console are as follows.
Indication
Definition
One short beep
Indicates that there has been a button pressed or that there
is a Mains failure.
Two short beeps
Indicates that the system has accepted your code.
Three short beeps
Indicates that the requested function has been executed.
One long beep
Indicates end of exit time or that the requested operation
has been denied or aborted.
One short beep / second
Indicates that you are currently in the walk test mode.
One short beep / minute
Indicates that a mains failure exists, this will coincide
with a flashing mains indicator.
Provided
for
Download
by
www.bendigosecurity.com.au