Page
6
Solution-8 Operators Manual
Electronics Design & Manufacturing
MA800O3C.DOC
Controls & Indicators
The Console
The console is the communications interface between you and your alarm system. It
allows you to issue commands and offers both visual and audible indications that guide
you through the general operation.
Visual Indicators
The console incorporates twelve indicators. Eight of which are used to indicate the
condition of each zone and four for general status. The following is a list of situations
and the relevant indications that will be seen.
Zone Indicator
Indication
Definition
Off
Zone Sealed
On
Zone Unsealed
Flashing Fast
Zone Alarm Condition
Flashing Slow
Zone Isolated
Away Indicator
The AWAY indicator is used to inform you that the system is in the armed condition.
Indication
Definition
Off
System is not in the Away mode
On
System Armed in the Away mode
Flashing
System in code change mode awaiting command
Stay Indicator
The STAY indicator is used to indicate that the system is armed in the Stay mode.
Indication
Definition
Off
System is not in the Stay mode
On
System Armed in the Stay mode
Flashing
System in Isolate mode awaiting
command
Provided
for
Download
by
www.bendigosecurity.com.au