EDM Solution 6+6 Wireless-AE, Operator'S Manual

Page: 62 / 72

Limitations
While this system is an advanced design security system, it does not offer
guaranteed protection against burglary, fire or any other emergency. An alarm
system, whether commercial or residential, is subject to compromise or failure.
Despite frequent testing, and due to, but not limited to, any or all of the
following; criminal tampering, electrical or communications disruption, it is
possible for the system to fail to perform as expected. Electronics Design and
Manufacturing Pty Limited does not represent that the product or system may
not be compromised or circumvented; or that the product or system will
prevent any personal injury or property loss by burglary, robbery, fire or
otherwise; nor that the product or system will in all cases provide adequate
warning or protection. A properly installed and maintained alarm system may
only reduce risk of burglary, robbery, fire or otherwise but it is not insurance or
a guarantee that these events will not occur.
CONSEQUENTLY, ELECTRONICS DESIGN AND MANUFACTURING
PTY LIMITED SHALL HAVE NO LIABILITY FOR ANY PERSONAL
INJURY, PROPERTY DAMAGE, OR OTHER LOSS BASED ON A CLAIM
THE PRODUCT FAILED TO GIVE WARNING.
Electronics Design and Manufacturing Pty Limited is not an insurer of either
the property or safety of the user's family or employees and limits its liability
for any loss or damage including incidental or consequential damages to
Electronics Design and Manufacturing Pty Limited's original selling price of
the product regardless of the cause of such loss or damage.
Maintenance
Electronics Design and Manufacturing Pty Limited recommend the system be
checked on a weekly basis for correct operation. Reference should also be
made to Australian Standard 2201.1 in that routine maintenance should be
carried out every six months by a licensed alarm technician.
62
Solution 6+6
Operators Manual
ISSUE123.DOC Electronics Design and Manufacturing Pty Limited