EDM Solution 6+6 Wireless-AE, Operator'S Manual

Page: 48 / 72

Codepad ID and Beeper Tone Change
Holding down the
8
button for two seconds performs one of two functions.
The first function is to indicate the area that the codepad belongs to. The
second function changes the tone of the codepad buzzer. There are fifty
different tones to choose from between 1500 Hz and 5000 Hz and they are
specific to each codepad. In a multiple codepad installation, each codepad can
have a different tone.
How To Determine The Area That Codepad Belongs To
This function is only available if the system has been partitioned.
1.
Hold the
8
button down until two beeps are heard before releasing the
button.
A zone indicator will illuminate to indicate which area that the codepad
belongs to.
Zone Indicator Codepad ID
1 Area 1 Codepad
2 Area 2 Codepad
7 Master Partitioned Codepad
Table 23: Codepad ID Descriptions
If no zone indicator illuminates, the codepad cannot be used when the
system has been partitioned.
2.
Press the button to exit this function.
How To Change The Tone Of The Buzzer
1.
To change the tone of the codepad buzzer, hold the
8
button down
continuously. The tone of the buzzer will start to increase in pitch.
If the codepad is an addressable area codepad or a Master Partitioned
codepad, two beeps will be heard indicating the area that the codepad
belongs to as described above. Shortly after two beeps are heard, the
tone of the codepad buzzer will begin to increase in pitch.
2.
Release the
8
button when the desired tone has been reached.
3.
Press the button to exit this function.
Initiate A Test Report
Holding the
9
button down until two beeps are heard will send a "Test" report
which is used to test the dialling and reporting capabilities of the system
without causing the sirens to sound. This hold down function is only
applicable if your system has the communication dialler enabled.
8
9
48
Solution 6+6
Operators Manual
ISSUE123.DOC Electronics Design and Manufacturing Pty Limited