EDM Solution 6+6 Wireless-AE, Operator'S Manual

Page: 20 / 72

MAINS Indicator
The
MAINS
indicator is used to indicate that the systems AC mains supply is
normal or has failed.
Indicator Definition
On
AC Mains Power Normal
Flashing AC Mains Failure
Table 5: MAINS Indicator
FAULT Indicator
The
FAULT
indicator is used to indicate that the system has detected a system
fault. Refer to "Fault Analysis Mode" on page 31 for more information on
system faults.
Indicator Definition
On There Is A Fault That Needs To Be Rectified
Off The System Is Normal, There Are No Faults
Flashing
There Is A Fault Waiting To Be Acknowledged
Table 6: FAULT Indicator
Audible Indicators
In general, the audible indications given out by the codepad are as follows:
Indicator Definition
One Short Beep A Button Has Been Pressed On The Codepad Or
End Of Exit Time When Armed In STAY Mode
Two Short Beeps The System Has Accepted Your Code
Three Short Beeps
The Requested Function Has Been Executed
One Long Beep Indicates End Of Exit Time For AWAY Mode Or
The Requested Operation Has Been Denied Or
Aborted
One Short Beep Every
Second
Walk Test Mode Is Active
One Short Beep Every
Minute
There Is A Fault Waiting To Be Acknowledged
Table 7: Audible Indications
20
Solution 6+6
Operators Manual
ISSUE123.DOC Electronics Design and Manufacturing Pty Limited