EDM Solution 6+6 Wireless-AE, Operator'S Manual

Page: 51 / 72

Operating Codepads When Partitioned
Operating From Area “Addressable” Codepads
If you have a partitioned system with “Area Addressable” codepads, the
operating procedure is exactly the same as described throughout this manual.
Refer to “Codepad ID and Beeper Tone Change” on page 48 to determine
which area a particular codepad belongs to.
Operating From A “Master Partitioned” Codepad
If you have a partitioned system with a “Master Partitioned” codepad installed,
the operating procedure is the same as described throughout this manual with
one exception. All operations are relative to the area whose “
AREA DISPLAY
”
indicator is illuminated at the time.
Example
If the “
AREA DISPLAY
” indicator number 2 is illuminated, all operations
performed will effect only Area 2. To perform any operations in another area,
you will have to move the “
AREA DISPLAY
” indicator to the desired area.
How To Move From One Area To The Next
1. Press the button.
The area display indicator will move to the next area.
2. Press the button again.
The area display indicator will move to the next area.
Figure 3: Master Partitioned Codepad
Solution 6+6
Operators Manual 51
Electronics Design and Manufacturing Pty Limited ISSUE123.DOC