56
Reference
By setting the V-440HD to “PR Control” from the menu, you can
control the V-440HD remotely from an Edirol PR-80 or PR-50
(hereafter referred to as PR Series devices). With this setup, the
V-440HD functions just like one of the video clips contained in the
PR series device.
Use a PR-80/50 running ver. 1.2 or later. The V-440HD’s PR
Control feature is not compatible with earlier versions, which
prevents use of the functions described above.
[What you can do when a PR series device and the V-440HD are
connected]
• You can seamlessly switch HD, RGB, and SD video input to the
V-440HD with the video clips contained in the PR series device.
You can employ the user interface of the PR series device for
overall control.
• You can use the PR Series Scheduler for automatic operation of
the V-440HD.
Example of Connections When Using PR Control Mode
*
For instructions on setting and operation of the PR series, refer to the
PR-80/50 Owner’s Manual.
*
Connect the video output from the PR-80/50 to one of the SD input
connectors 1–4 (S-Video or Composite).
Setting PR Control on the V-440HD
Use the following procedure to set PR mode.
1.
Press the MENU button.
2.
Select “14. MIDI Setup.”
3.
Press the ENTER button.
4.
Select “30. PR Control.”
5.
Press the ENTER button.
6.
Select “On.”
Enabling this setting allows the V-440HD to be run from the PR
Series device.
Controlling the V-440HD from a
PR-80/50
MIDI
Composite or S-Video
[Raar panel]
[RGB]
[HD]
[SD]
[PR-80/50]
