48
Other Operations
You can transmit (bulk dump) a V-440HD’s settings to another V-
440HD connected with a MIDI cable.
Connect one end of the MIDI cable to the MIDI OUT connector
of the V-440HD transmitting the settings and the other end to
the MIDI IN connector of the V-440HD receiving the settings.
You can then connect the MIDI OUT connector of the receiving
V-440HD to the MIDI IN of another V-440HD to transmit the
settings to multiple V-440HDs. When using “Multi-Screen
Output” (p. 44), you can use the following procedure without
changing the setup to transmit the settings to the slaves.
[Illustration of Connection]
This process overwrites the receiving V-440HD’s settings. The
previous settings are lost when overwritten. If you want to save
these settings, use the procedure described in “Saving the V-
440HD’s Settings to a Computer” (p. 48) to back up the V-
440HD’s settings to a computer.
Use the procedure below to transmit the settings.
1.
Press the MENU button.
2.
Select “14. MIDI Setup.”
3.
Press the ENTER button.
4.
Select “31. MIDI Bulk Dump.”
5.
Press the ENTER button.
6.
Select “Yes.”
7.
Press the ENTER button.
The data is then transmitted.
You can transfer and save the V-440HD’s settings to a computer or
other device connected with a cable to the V-440HD’s REMOTE
connector (p. 53).
For more on the REMOTE connector specifications, refer to
“About the REMOTE Connector” (p. 53).
[Illustration of Connection]
Instructions for Transmitting the
Settings
1.
Press the MENU button.
2.
Select “13. System.”
3.
Press the ENTER button.
4.
Select “18. All Data Transmit.”
5.
Press the ENTER button.
6.
Select “Yes.”
7.
Press the ENTER button.
The data is transmitted. The progress of the transfer is indicated
at the bottom of the screen as a percentage.
*
Transfer of all of the data is completed in approximately 30
seconds.
You can cancel transmission by pressing the MENU button
while the transmission is still in progress.
Transmitting Settings to
MIDI-Connected V-440HDs
MIDI
[Device Transmitting Settings]
[Device Receiving Settings]
Saving the V-440HD’s
Settings to a Computer
RS-232C
[PC]
