40
2.4.4 FTP Configuration
You can set FTP server’s parameters here.
The descriptions of every setting in this menu will be given below:
Item
Description
FTP Server
Input the IP address or host name of the FTP server you wish to use here.
FTP Port
Input the port number of the FTP server you wish to use here.
User Name
Input the user name of the FTP server you wish to use here.
Password
Input the password of the FTP server you wish to use here.
Remote Folder
Input the remote folder name on the FTP server here. If nothing is specified here, all
uploaded image files will be placed in FTP server’s root directory.
Please ask FTP server’s administrator to know which folder you should use. Certain
user name may have restrictions and therefore can not place the file in the directory
not owned by the user.
Passive Mode
Select ‘Enable’ to use passive mode to send file, or select ‘Disable’ to not to use
passive mode to send file.
Some FTP servers require passive mode, if you don’t know, please ask FTP server’s
administrator; most of FTP servers will work fine with both modes, but if you found
that non-passive mode is not working, you can try to use passive mode.
Click ‘Apply’ to save settings and make the new settings take effect.
After that, you can click ‘Upload a test file’ to send a file to the FTP server you set here, so you can make sure
the setting you specified here is correct and working.
Summary of Contents for IC-7000PT V2
Page 1: ...1...
Page 50: ...50 2 7 3 File Management You can use this menu to manage the files stored on SD card...
Page 78: ...78...
