Edimax EW-7288APC, User Manual

Page: 86 / 95

86
4. I can’t access the Internet.
a. Ensure that all cables are connected properly. Try a different Ethernet cable.
b. Check if you can access the browser based configuration interface. If not, please
ensure your Wi-Fi device is set to use a dynamic IP address. If you are unsure
how to do this, try using a computer and refer to the user manual for guidance.
c. Connect a computer directly to your modem and check if you can access the
Internet. If you can’t, please contact your Internet service provider for
assistance.
5. I can’t open the browser based configuration interface.
a. Please ensure your Wi-Fi device is set to use a dynamic IP address. If you are
unsure how to do this, try using a computer and refer to the user manual for
guidance.
6.
How do I reset my device to factory default settings?
a. To reset the device back to its factory default settings, press and hold the
WPS/Reset button for over 10 seconds, until the LED displays
on and red . Please
wait a few minutes for the product to restart. When the device restarts, all
settings will be reset. Default settings are displayed on the product label on the
bottom of the device, as shown below:
Wi-Fi SSID This is the default Wi-Fi network name for the
device. Search for this name (SSID) and connect to
it in order to set up your EW-7288APC.