Static
Routing
•
Network Address
– The network address of the remote LAN segment. For
standard class "C" LANs, the network address is the first 3 fields of the
Destination IP Address. The 4th (last) field can be left at 0.
•
Netmask
–The Network Mask for the remote LAN segment. For class "C"
networks, the default mask is 255.255.255.0
•
Gateway
– The IP Address of the Gateway or Router that the Multi-WAN VPN
Link Balancer must use to communicate with the destination IP address
entered above. (NOT the router attached to the remote segment.)
•
Interface
– Select the correct interface - usually "LAN". The "WAN" interface
is only available if NAT (Network Address Translation) is disabled.
•
Metric
– The number of "hops" (routers) to pass through to reach the remote
LAN segment. The shortest path will be used.
Routing List
This shows the current routing table set by the user.
Configuring Other Routers on your LAN
All traffic for devices not on the local LAN must be forwarded to the Multi-WAN VPN Link Balancer so
that it can be forwarded to the Internet. This is done by configuring other Routers to use the Multi-
WAN VPN Link Balancer as the
Default Route
or
Default Gateway
, as illustrated by the example
below.
Static Routing - Example
Router B
(192.168.2.90)
(192.168.3.70)
Router A
Segment 0
Segment 2
Segment 1
(192.168.1.xx)
(192.168.2.xx)
(192.168.1.100)
(192.168.1.1)
(192.168.3.xx)
(192.168.2.80)
Figure 4-3: Routing Example
Page 31
Summary of Contents for ER-1088
Page 1: ...Multi WAN VPN Link Balancer User s Guide...
Page 2: ......
