Select
LAN & DHCP
from the menu. You will see a screen like in the example below.
9.
Figure 2-3: LAN & DHCP Setup
10.
11.
If your LAN already has a DHCP Server and you wish to continue using it, the following
configuration is required:
•
The DHCP Server function in the Multi-WAN VPN Link Balancer must be
disabled
. You will
find this setting in the
LAN & DHCP
screen.
•
Your DHCP Server must be configured to provide the Multi-WAN VPN Link Balancer's LAN IP
Address as the "Default Gateway".
•
Your DHCP Server must provide correct DNS addresses to any connected PCs.
Ensure these settings are suitable for your LAN:
•
See the following table for details of each setting. For most situations, the default settings will
be suitable.
Page 11
Summary of Contents for ER-1088
Page 1: ...Multi WAN VPN Link Balancer User s Guide...
Page 2: ......
