Edimax BR-6641 User Manual Download Page 15

Page: 15 / 86

BR-6641 User Manual

2.1 Summary

[Summary] is in the submenu of [System], which helps the Administrator to know

the system information. While logging in the Web UI, System/Summary is the first

page you see when you log into BR-6641’s web-based UI.

[Summary] provide the following information:

System Information

Category Field

Description

Version

The Firmware Version.

Serial Number

The Serial number.

Up Time

Time since the last reboot.

Connections

Number of total connections.

CPU Usage %

CPU usage in percentage.

System Information

Packets/Second

Number of packets served per
second.

Table 3.1 System Information

Note:

Connections may jump up to over 100 when BR-6641 is starting up. This is
due to many ICMP packets sent out by BR-6641 to test the network. It will drop
back to normal there after.

Summary of Contents for BR-6641























































































Search results

Summary of Contents for BR-6641

Reviews:

Related manuals for BR-6641

Brands by name

Popular brands

Edimax BR-6641, User Manual

Search results

Summary of Contents for BR-6641

Reviews:

Related manuals for BR-6641

Brands by name

Popular brands