Edimax BR-6641 User Manual Download Page 72

Page: 72 / 86

BR-6641 User Manual

are still reachable via other live WAN links.

In order to let your Multihoming function properly, you must make sure that the

requirements listed below are met.

Prerequisites for Multihoming:

Multiple WAN links (at least two).

Registered domain names for your publicly accessible servers.

Your publicly accessible servers must be configured as virtual servers, or have public

IP addresses.

By default, Multihoming is switched off. To use this service, check the check box to

the right of “Enable Multihoming” on the top of the page. There are three tables for

configuring your Multihoming settings. The first table lets you define the global

parameters. The second table is used to configure your domain name settings.

Global Setting

Specify the PTR data in this field, including TTL, IP Address, and Host Name for

reverse looking up the host name of corresponding IP Address.

Summary of Contents for BR-6641























































































Search results

Summary of Contents for BR-6641

Reviews:

Related manuals for BR-6641

Brands by name

Popular brands

Edimax BR-6641, User Manual

Search results

Summary of Contents for BR-6641

Reviews:

Related manuals for BR-6641

Brands by name

Popular brands