Edimax BR-6641 User Manual Download Page 20

Page: 20 / 86

BR-6641 User Manual

refer other materials.

You may specify a target device in the Target IP field. It accepts either an IP

address or a host name.

You may specify a target device in the Target IP field. It accepts either an IP

address or FQDN. Select a network interface, WAN or LAN. If it is WAN, select

WAN link number in Index field.

Note:

If a domain name is used to traceroute, a DNS server has to be specified in [Network ]

→

[Host Names].

Arping:

Arping is used to detect the MAC address of a computer.

You may specify a target device in the Target IP field. It accepts either an IP

address or a host name. Select a network interface (WAN, LAN). If it is WAN,

select WAN link number in Index field. For ARP related error messages, please

refer other materials.

Note:

If a host name is used in Target IP field, then a DNS server has to be specified in

[Network ]

→

[Host Names].

Summary of Contents for BR-6641























































































Search results

Summary of Contents for BR-6641

Reviews:

Related manuals for BR-6641

Brands by name

Popular brands

Edimax BR-6641, User Manual

Search results

Summary of Contents for BR-6641

Reviews:

Related manuals for BR-6641

Brands by name

Popular brands