Edimax BR-6641 User Manual Download Page 63

Page: 63 / 86

BR-6641 User Manual

4.4 QoS

BR-6641 provides QoS towards both inbound and outbound traffic. It can ensure

certain services which are allocated enough bandwidth to provide satisfactory

quality. Because of the burst nature of voice/video/data traffic, sometimes the

amount of traffic exceeds the speed of a link. This function is to manage the

bandwidth so as to fine-tune your bandwidth utilization. Bandwidth Management

(BM) in BR-6641 is separated by the direction of traffic flow – either inbound (from

WAN to LAN) or outbound (from LAN to WAN).

Figure 4.5

The Location of “Service/QoS” on the Menu Bar

The setting of QoS includes two parts: Classes and Filters.

Classes are to define the bandwidth classes that the rules are imposed on. The

defining of the class can be according to Priority, Idle/Busy Hour.

Summary of Contents for BR-6641























































































Search results

Summary of Contents for BR-6641

Reviews:

Related manuals for BR-6641

Brands by name

Popular brands

Edimax BR-6641, User Manual

Search results

Summary of Contents for BR-6641

Reviews:

Related manuals for BR-6641

Brands by name

Popular brands