91
Federal Communications Commission (FCC) Radiation
Exposure Statement
This equipment must be installed and operated in
accordance with provided instructions and a minimum 20 cm
spacing must be provided between computer mounted
antenna and person’s body (excluding extremities of hands,
wrist and feet) during wireless modes of operation.
The equipment version marketed in US is restricted to
usage of the channels 1-11 only.
R&TTE Compliance Statement
This equipment complies with all the requirements of
DIRECTIVE 1999/5/EC OF THE EUROPEAN PARLIAMENT
AND THE COUNCIL of March 9, 1999 on radio equipment
and telecommunication terminal Equipment and the mutual
recognition of their conformity (R&TTE)
The R&TTE Directive repeals and replaces in the directive
98/13/EEC (Telecommunications Terminal Equipment and
Satellite Earth Station Equipment) As of April 8, 2000.
Safety
This equipment is designed with the utmost care for the
safety of those who install and use it. However, special
attention must be paid to the dangers of electric shock and
static electricity when working with electrical equipment. All
guidelines of this and of the computer manufacture must
therefore be allowed at all times to ensure the safe use of
the equipment.
EU Countries Intended for Use
The ETSI version of this device is intended for home and
office use in Austria, Belgium, Denmark, Finland, France,
Germany, Greece, Ireland, Italy, Luxembourg, Bulgaria,
Cyprus, Czech Republic, Estonia, Hungary, Latvia, Lithuania,
Malta, Poland, Romania, Slovakia, Slovenia, the
Netherlands, Portugal, Spain, Sweden, and the United
Kingdom.
The ETSI version of this device is also authorized for use in
Summary of Contents for AR-7284WNA
