84
This page displays event log data in the chronological manner.
You can read the event log from the local host or send it to a
syslog server. Available event severity levels are as follows:
Emergency, Alert, Critical, Error, Warning, Notice,
Informational and Debugging. In this page, you can enable or
disable the system log function.
The procedure for logging the events is as follows:
Step 1
Select
Enable Log.
Step 2
Select the display mode from the
Mode
drop-down
list.
Step 3
Enter the
Server IP Address
and
Server UDP Port
if
the
Mode
is set to
Both
or
Remote
.
Step 4
Click
Apply
to apply the settings.
Step 5
Click
View System Log
to view the detail information
of system log.
3.5 Status
You can view the system information and monitor device
performance.
3.5.1
Device Info
Choose
Status
>
Device Info
. The page shown in the
following figure appears.
Summary of Contents for AR-7284WNA
