Edimax AR-7284WNA User Manual Download

Page: 9 / 97

1.3 LEDs and Interfaces

Front Panel

Figure 1 Front panel

The following table describes the LEDs of the device.

LED

Color Status

Description

Green

Off

The power is off.

The power is on and the initialization
is normal.

Red

The device is initiating.

Blinks

The firmware is upgrading.

LAN
1/2/3/4

Green

Off

No LAN link.

Blinks

Data is being transmitted through
the LAN interface.

The connection of LAN interface is
normal.

Green

Off

No WLAN connection.

Blinks

Data is transmitted through the
WLAN interface.

The connection of WLAN interface is
normal.

Green

Off

No USB signal is detected.

Blinks

Data is passing through USB port.

The USB interface is ready.

ADSL Green

Off

Initial self-test is failed.

Blinks

The device is detecting DSL signal.

The DSL line connection is
established.

Internet

Green

Off

The device is running under Bridge

Summary of Contents for AR-7284WNA


































































































Search results

Summary of Contents for AR-7284WNA

Reviews:

Related manuals for AR-7284WNA

Brands by name

Popular brands

Edimax AR-7284WNA, User Manual

Search results

Summary of Contents for AR-7284WNA

Reviews:

Related manuals for AR-7284WNA

Brands by name

Popular brands