Edimax 3G-6408n User Manual Download Page 98

Page: 98 / 115

Comment

You can input any text here as the comment of this

MAC

‘OOM A

You can input up to 16 alphanumerical characters
here. This is optional and you can leave it blank,

comment for every MAC addresses as a memory aid.

Add

dd the MAC address and

associated comment to the MAC address filtering
table.

Reset

Remove all inputted values.

All MAC address entries will be listed in this page:

To delete one or more entries listed here, please check the box of the mapping entry

“

‘

You can restrict computers in the network from accessing specified websites or from

using specified applications with access control.

If you wish to use IP address-

IP F

the behavior of IP filtering table (Deny the access of IP addresses in the list, or allow the

A PC

to the list:

Summary of Contents for 3G-6408n




















































































































Search results

Summary of Contents for 3G-6408n

Reviews:

Related manuals for 3G-6408n

Brands by name

Popular brands

Edimax 3G-6408n, User Manual

Search results

Summary of Contents for 3G-6408n

Reviews:

Related manuals for 3G-6408n

Brands by name

Popular brands